ESTADO DE LA INTENSIDAD LUMÍNICA DE LAS LÁMPARAS DE FOTOPOLIMERIZACIÓN DE CLÍNICAS ODONTOLÓGICAS DE CENTROS DE SALUD DE LA CIUDAD DE CUENCA

Autores

DOI:

https://doi.org/10.53612/recisatec.v3i6.296

Palavras-chave:

Radiometro, Intensidad lumínica, Fotopolimerizacion

Resumo

La eficacia de un tratamiento restaurador utilizando compuestos resinosos puede verse afectado por la intensidad lumínica que la lámpara de fotopolimerización sea capaz de emitir. El presente estudio tuvo como objetivo determinar la prevalencia de la intensidad lumínica de las lámparas de fotopolimerización de las clínicas odontológicas de centros de salud de la Ciudad de Cuenca, Ecuador. Se evaluó la intensidad lumínica 38 lámparas de fotopolimerización correspondientes a 23 centros de salud y se clasificó en potencia baja (<300mw/cm2), potencia regular (300 – 800 mw/cm2) y alta potencia (>800 mw/cm2). La intensidad de la potencia lumínica fue evaluada con el radiómetro CK12024 por tres observadores previo a la autorización de los profesionales a cargo para el análisis de sus dispositivos de fotocurado.  Se obtuvo que, de las 38 lámparas de fotopolimerización evaluadas, el 5.26% (n=8) presentan una potencia baja, el 21.05% (n=8) presentan una potencia regular y el 73.68% (28) presentan una potencia alta. De acuerdo a los datos obtenidos, concluimos que la mayoría de lámparas de fotopolimerización en los centros de salud de la Ciudad de Cuenca tienen un rendimiento óptimo, además de enfatizar la evaluación periódica de las lámparas de fotopolimerización para controlar el rendimiento óptimo.

Downloads

Não há dados estatísticos.

Biografia do Autor

Milton Alexis Quinchiguano Caraguay

Estudante da Faculdade de Odontologia da Universidade de Cuenca, Equador

David Ismael Bravo Achundia

Estudante da Faculdade de Odontologia da Universidade de Cuenca, Equador

Esteban Eduardo Amoroso Calle

Estudante da Faculdade de Odontologia da Universidade de Cuenca, Equador

Manuel Estuardo Bravo Calderon

Professor da Faculdade de Odontologia da Universidade de Cuenca, Equador

Referências

Price RB, Ferracane JL, Shortall AC. Light-Curing Units: A Review of What We Need to Know. Vol. 94, Journal of Dental Research. SAGE Publications Inc.; 2015. p. 1179–86. DOI: https://doi.org/10.1177/0022034515594786

Michaud PL, Price RBT, Labrie D, Rueggeberg FA, Sullivan B. Localised irradiance distribution found in dental light curing units. J Dent [Internet]. 2014 Feb [cited 2023 Jun 5];42(2):129–39. Available from: https://www.researchgate.net/publication/259002710_Localized_Irradiance_Distribution_Found_in_Dental_Light_Curing_Units DOI: https://doi.org/10.1016/j.jdent.2013.11.014

Chingualulo GC, Catuta EM, Morais S, Teresa A, Oliveira N, Kamalanga HC. PREVALENCIA DE CARIES DENTAL Y FACTORES RELACIONADOS EN ESTUDIANTES DE ODONTOLOGÍA DEL 4o CURSO DEL INSTITUTO SUPERIOR POLITÉCNICO DE CAÁLA-2021/2022. RECISATEC - REVISTA CIENTÍFICA SAÚDE E TECNOLOGIA - ISSN 2763-8405 [Internet]. 2023 Jan 20 [cited 2023 Jun 18];3(1):e31236–e31236. Available from: https://recisatec.com.br/index.php/recisatec/article/view/236 DOI: https://doi.org/10.53612/recisatec.v3i1.236

Kenneth J A, Chiayi S, Rawls HR. Phillip’s Science of Dental Materials. 11thEdición. St. Louis, Missouri: Elsevier Inc.; 2013.

Manuel A, Gil C, Montenegro Y, Ii O, Álvarez J, Iii R. Historical evolution of light-cure lamps (photo polymerization’s lamps) [Internet]. Vol. 15, Revista Habanera de Ciencias Médicas. 2016. Available from: http://scielo.sld.cu

Rivera JM. Técnicas de fotopolimerización complementaria en la evaluación de la microdureza en una resina compuesta de nanopartículas. Revista KIRU [Internet]. 2016 Jun 19 [cited 2023 Jun 4];13(1):51–9. Available from: https://www.aulavirtualusmp.pe/ojs/index.php/Rev-Kiru0/article/view/878

Prochnow FHO, Kunz PVM, Correr GM, Kaizer M da R, Gonzaga CC. Relationship between battery level and irradiance of light-curing units and their effects on the hardness of a bulk-fill composite resin. Restor Dent Endod. 2022;47(4). DOI: https://doi.org/10.5395/rde.2022.47.e45

Suliman AA, Abdo AA, Elmasmari HA. Training and experience effect on light-curing efficiency by dental practitioners. J Dent Educ. 2020 Jun 1;84(6):652–9. DOI: https://doi.org/10.1002/jdd.12113

Suliman AA, Abdo AA, Elmasmari HA. Effect of Contamination, Damage and Barriers on the Light Output of Light-Curing Units. Open Dent J. 2019 Jul 16;13(1):196–202. DOI: https://doi.org/10.2174/1874210601913010196

Soares CJ, Faria-E-Silva AL, Rodrigues M de P, Fernandes Vilela AB, Pfeifer CS, Tantbirojn D, et al. Polymerization shrinkage stress of composite resins and resin cements - What do we need to know? Braz Oral Res [Internet]. 2017 Aug 1 [cited 2023 Jun 4];31(suppl 1):49–63. Available from: https://pubmed.ncbi.nlm.nih.gov/28902242/ DOI: https://doi.org/10.1590/1807-3107bor-2017.vol31.0062

Mills RW, Jandt KD, Ashworth SH. Dental composite depth of cure with halogen and blue light emitting diode technology. Br Dent J. 1999;186(8):388–91. DOI: https://doi.org/10.1038/sj.bdj.4800120a

Al Shaafi MM, Maawadh AM, Al Qahtani MQ. Evaluation of light intensity output of QTH and LED curing devices in various governmental health institutions. Oper Dent. 2011 Jul;36(4):356–61. DOI: https://doi.org/10.2341/10-247-O

Krämer N, Lohbauer U, Garcia-Godoy F, Frankenberger R. Light curing of resin-based composites in the LED era Clinical and microbiological evaluation of peri-implant microbial contamination of cemented prostheses on titanium or zirconia connectors View project master degree in UFRGS View project [Internet]. 2014. Available from: https://www.researchgate.net/publication/23155639

AlShaafi MM. Factors affecting polymerization of resin-based composites: A literature review. Vol. 29, Saudi Dental Journal. Elsevier B.V.; 2017. p. 48–58. DOI: https://doi.org/10.1016/j.sdentj.2017.01.002

Emami N, Söderholm KJM. How light irradiance and curing time affect monomer conversion in light-cured resin composites. Vol. 111, Eur J Oral Sci. 2003. DOI: https://doi.org/10.1111/j.0909-8836.2003.00082.x

RIBEIRO RA de O, LIMA FF de C, LIMA IM, NASCIMENTO ABL do, TEIXEIRA HM. Avaliação da intensidade de luz e da manutenção dos aparelhos fotopolimerizadores utilizados em clínicas odontológicas da cidade do Recife-PE. Rev Odontol UNESP. 2016 Dec 12;45(6):351–5. DOI: https://doi.org/10.1590/1807-2577.06916

Marín Naranjo LD. ANÁLISIS DE LA LEY DE CUADRADO INVERSO PARA MEDICIÓN PRÁCTICA DE ILUMINANCIA. Revista Ingeniería. 2011 Jul 7;19(1). DOI: https://doi.org/10.15517/ring.v19i1.687

Palin WM, Leprince JG, Hadis MA. Shining a light on high volume photocurable materials. Dental Materials. 2018 May 1;34(5):695–710. DOI: https://doi.org/10.1016/j.dental.2018.02.009

A. Mahmood M, M. Faraj B. Evaluation of light curing units and Dentists’ knowledge about photo polymerization techniques in Sulaimani governmental dental clinics. Sulaimani dental journal [Internet]. 2019 Jun 29 [cited 2023 Jun 5];6(1):33–9. Available from: https://www.researchgate.net/publication/334631983_Evaluation_of_light_curing_units_and_Dentists’_knowledge_about_photo_polymerization_techniques_in_Sulaimani_governmental_dental_clinics DOI: https://doi.org/10.17656/sdj.10088

Omidi BR, Gosili A, Jaber-Ansari M, Mahdkhah A. Intensity output and effectiveness of light curing units in dental offices. J Clin Exp Dent [Internet]. 2018 Jun 1 [cited 2023 Jun 5];10(6):e555. Available from: /pmc/articles/PMC6012498/

Lee Y, Nik Abdul Ghani N, Karobari M, Noorani T, Halim M. Evaluation of light-curing units used in dental clinics at a University in Malaysia. Journal of International Oral Health [Internet]. 2018 Jul 1 [cited 2023 Jun 5];10(4):206. Available from: https://www.jioh.org/article.asp?issn=0976-7428;year=2018;volume=10;issue=4;spage=206;epage=209;aulast=Lee DOI: https://doi.org/10.4103/jioh.jioh_114_18

Nassar HM, Ajaj R, Hasanain F. Efficiency of light curing units in a government dental school. J Oral Sci [Internet]. 2018 [cited 2023 Jun 5];60(1):142–6. Available from: https://pubmed.ncbi.nlm.nih.gov/29576574/ DOI: https://doi.org/10.2334/josnusd.17-0071

Madhusudhana K, Swathi TV, Suneelkumar C, Lavanya A. A clinical survey of the output intensity of light curing units in dental offices across Nellore urban area. SRM Journal of Research in Dental Sciences [Internet]. 2016 [cited 2023 Jun 5];7(2):64. Available from: https://www.srmjrds.in/article.asp?issn=0976-433X;year=2016;volume=7;issue=2;spage=64;epage=68;aulast=Madhusudhana DOI: https://doi.org/10.4103/0976-433X.182657

Bansal R, Bansal M, Walia S, Bansal L, Singh K, Aggarwal R. Assessment of efficacy and maintenance of light-curing units in dental offices across Punjab: A clinical survey. Indian Journal of Dental Sciences [Internet]. 2019 [cited 2023 Jun 5];11(1):42. Available from: http://www.ijds.in/article.asp?issn=0976-4003;year=2019;volume=11;issue=1;spage=42;epage=45;aulast=Bansal DOI: https://doi.org/10.4103/IJDS.IJDS_63_18

Publicado

26/06/2023

Como Citar

Quinchiguano Caraguay, M. A., Bravo Achundia , D. I., Amoroso Calle, E. E., & Bravo Calderon , M. E. (2023). ESTADO DE LA INTENSIDAD LUMÍNICA DE LAS LÁMPARAS DE FOTOPOLIMERIZACIÓN DE CLÍNICAS ODONTOLÓGICAS DE CENTROS DE SALUD DE LA CIUDAD DE CUENCA. RECISATEC - REVISTA CIENTÍFICA SAÚDE E TECNOLOGIA - ISSN 2763-8405, 3(6), e36296. https://doi.org/10.53612/recisatec.v3i6.296

Artigos Semelhantes

Você também pode iniciar uma pesquisa avançada por similaridade para este artigo.

Artigos mais lidos pelo mesmo(s) autor(es)